浅析影响水泥胶砂强度的因素
摘要:利用正交试验设计表,对水泥胶砂试件在成型阶段、养护阶段和试压阶段的各种可能影响强度的因素进行分析,得出了各种因素的影响程度,总结出在检测过程中最易造成水泥强度出现较大偏差的原因,为在其他工程中分析类似问题提供了经验。
关键词:水泥强度、试件成型、养护、夹具、仪器检定
Analysis on the factors influencing the strength of the cement
Abstract: To explore the influence of various factors on the detection of the strength of cement, orthogonal design test, forming stage, the maintenance and test pressure stage of various factors analysis of cement test, the influence of various factors, summed up in the detection process is the most likely cause the strength of the cement cause large deviation, Provided the experience for the analysis of similar problems in other engineering .
Keywords: cement strength, molding, curing, fixture, instrument calibration
0 引言
正交试验设计是运用正交设计表进行设计试验组数,并对各个水平(因素)的影响程度进行分析,正交设计表是根据正交性从全面试验中挑选出部分有代表性的点进行试验,这些有代表性的点具备了“均匀分散,齐整可比”的特点,正交试验设计是分式析因设计的主要方法。是一种高效率、快速、经济的试验设计方法[2]。在对同一水泥样品进行检测时,不同试验室之间的检测数据相差较大,试验仪器、操作人员、试验室环境等都可能对水泥强度的检测造成影响,为探寻各种因素对水泥胶砂强度的影响程度,按水泥胶砂试件成型阶、养护、试压分成三个阶段,对每个阶段的影响因素利用正交试验设计表进行试验分析。以期得出各种因素的影响程度,并总结出在检测过程中最易造成水泥强度出现较大偏差的原因。
因篇幅问题不能全部显示,请点此查看更多更全内容
Copyright © 2019- dfix.cn 版权所有 湘ICP备2024080961号-1
违法及侵权请联系:TEL:199 1889 7713 E-MAIL:2724546146@qq.com
本站由北京市万商天勤律师事务所王兴未律师提供法律服务