1SMA5927BT3

Zener Voltage Regulators

This complete new line of 1.5 Watt Zener Diodes offers thefollowing advantages.

Features

http://onsemi.com

•••••••

Standard Zener Breakdown Voltage Range − 3.3 V to 68 VESD Rating of Class 3 (>16 kV) per Human Body ModelFlat Handling Surface for Accurate Placement

Package Design for Top Slide or Bottom Circuit Board MountingLow Profile Package

Ideal Replacement for MELF PackagesPb−Free Packages are Available

CATHODEANODEMechanical Characteristics:

CASE: Void-free, transfer-molded plastic

FINISH: All external surfaces are corrosion resistant with readily

SMACASE 403DPLASTICsolderable leads

MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:

260°C for 10 seconds

POLARITY: Cathode indicated by molded polarity notch or cathodeband

FLAMMABILITY RATING: UL 94 V−0 @ 0.125 in

MAXIMUM RATINGS

Rating

DC Power Dissipation @ TL = 75°C,Measured Zero Lead Length (Note 1)Derate above 75°C

Thermal Resistance, Junction−to−LeadDC Power Dissipation @ TA = 25°C (Note 2)Derate above 25°C

Thermal Resistance, Junction−to−AmbientOperating and Storage Temperature Range

SymbolPDRqJLPDRqJATJ, Tstg

Value1.520500..0250−65 to+150

UnitWmW/°C°C/WWmW/°C°C/W°C

MARKING DIAGRAM8xxBAYWWG8xxBAYWWG= Device Code (Refer to page 2)= Assembly Location= Year= Work Week= Pb−Free PackageORDERING INFORMATION

Device1SMA59xxBT31SMA59xxBT3G

PackageSMASMA(Pb−Free)

Shipping†5000/Tape & Reel5000/Tape & Reel

Stresses exceeding Maximum Ratings may damage the device. MaximumRatings are stress ratings only. Functional operation above the RecommendedOperating Conditions is not implied. Extended exposure to stresses above theRecommended Operating Conditions may affect device reliability.1.1 in square copper pad, FR−4 board.

2.FR−4 Board, using ON Semiconductor minimum recommended footprint.

†For information on tape and reel specifications,including part orientation and tape sizes, pleaserefer to our Tape and Reel Packaging SpecificationsBrochure, BRD8011/D.

DEVICE MARKING INFORMATION

See specific marking information in the device markingcolumn of the Electrical Characteristics table on page 2 ofthis data sheet.

© Semiconductor Components Industries, LLC, 20071

March, 2007 − Rev. 6

Publication Order Number:

1SMA5913BT3/D

1SMA5913BT3 Series

ELECTRICAL CHARACTERISTICS (TA = 25°C unless

otherwise noted, VF = 1.5 V Max. @ IF = 200 mA for all types)SymbolVZIZTZZTIZKZZKIRVRIFVFIZM

Parameter

Reverse Zener Voltage @ IZTReverse Current

Maximum Zener Impedance @ IZTReverse Current

Maximum Zener Impedance @ IZKReverse Leakage Current @ VRReverse VoltageForward CurrentForward Voltage @ IFMaximum DC Zener Current

VZVRIRVFIZTIFIVZener Voltage RegulatorELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 1.5 V Max. @ IF = 200 mA for all types)

Zener Voltage (Note 4)DeviceMarking813B814B815B816B817B818B819B820B821B822B823B824B825B826B827B828B829B830B831B832B833B834B835B836B837B838B839B840BVZ (Volts)Min3.133.423.704.084.4.845.325.6.467.127.798.9.510.4511.412.3514.2515.217.11920.922.825.6528.531.3534.237.00.85Nom3.33.63.94.34.75.15.66.26.87.58.29.110111213151618202224273033363943Max3.473.784.104.524.945.365.886.517.147.888.619.5610.511.5512.613.6515.7516.818.92123.125.228.3531.534.6537.840.95.15@ IZTmA113.6104.296.187.279.873.566.960.555.15045.741.237.534.131.228.82523.420.818.71715.613.912.511.410.49.68.7Zener ImpedanceZZT @ IZTW109.07.56.05.04.02.02.02.53.03..04.55.56.57.09.010121417.519232633384553ZZK @ IZKW500500500500500350250200200400400500500550550550600600650650650700700750800850900950mA1.01.01.01.01.01.01.01.01.00.50.50.50.250.250.250.250.250.250.250.250.250.250.250.250.250.250.250.25Leakage CurrentIR @ VRmA5035.512.52.52.52.52.52.52.52.52.52.52.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.5Volts1.01.01.01.01.52.03.04.05.26.06.57.08.08.49.19.911.412.213.715.216.718.220.622.825.127.429.732.735.838.842.7.151.7IZMmA(dc)4517385349319294268242221200183165150136125115100948375686356504238353229272422Device* (Note 3)1SMA5913BT3, G1SMA5914BT3, G1SMA5915BT3, G1SMA5916BT3, G1SMA5917BT3, G1SMA5918BT3, G1SMA5919BT3, G1SMA5920BT3, G1SMA5921BT3, G1SMA5922BT3, G1SMA5923BT3, G1SMA5924BT3, G1SMA5925BT3, G1SMA5926BT3, G1SMA5927BT3, G1SMA5928BT3, G1SMA5929BT3, G1SMA5930BT3, G1SMA5931BT3, G1SMA5932BT3, G1SMA5933BT3, G1SMA5934BT3, G1SMA5935BT3, G1SMA5936BT3, G1SMA5937BT3, G1SMA5938BT3, G1SMA5939BT3, G1SMA5940BT3, G所选用元件1SMA5941BT3, G841B44.6749.358.06710000.251SMA5942BT3, G842B48.455153.557.37011000.251SMA5943BT3, G843B53.25658.86.78613000.251SMA5944BT3, G844B58.96265.16.010015000.251SMA5945BT3, G845B.66871.45.512017000.253.Tolerance and Voltage Regulation Designation − The type number listed indicates a tolerance of ±5%.4.VZ limits are to be guaranteed at thermal equilibrium.*The “G” suffix indicates Pb−Free package available.

http://onsemi.com

2

1SMA5913BT3 Series

Rating and Typical Characteristic Curves (TA = 25°C)

43.22.4TL1.6100

PD, MAXIMUM POWER DISSIPATION (WATTS)IZ, ZENER CURRENT (mA)12515010

1

0.8TA00255075100T, TEMPERATURE (°C)

0.1

0

2

46

VZ, ZENER VOLTAGE (VOLTS)

8

10

Figure 1. Steady State Power Derating

Figure 2. VZ − 3.3 thru 10 Volts

θVZ, TEMPERATURE COEFFICIENT (mV/° C)10010820−2−42468VZ, ZENER VOLTAGE (VOLTS)

1012VZ @ IZTIZ, ZENER CURRENT (mA)10

1

0.1

01020

50603040

VZ, ZENER VOLTAGE (VOLTS)

7080

Figure 3. VZ = 12 thru 68 Volts

Figure 4. Zener Voltage − 3.3 to 12 Volts

θVZ, TEMPERATURE COEFFICIENT (mV/° C)1007050

ZZ, DYNAMIC IMPEDANCE (OHMS)VZ @ IZT100

IZ(dc) = 1 mA3020

10

10 mAIZ(rms) = 0.1 IZ(dc)100VZ, ZENER VOLTAGE (VOLTS)

20 mA10

10

203050VZ, ZENER VOLTAGE (VOLTS)

70

100

10Figure 5. Zener Voltage − 12 to 68 VoltsFigure 6. Effect of Zener Voltage

http://onsemi.com

3

1SMA5913BT3 Series

Rating and Typical Characteristic Curves (TA = 25°C)

1000MEASURED @ZERO BIASMEASURED @VZ/210NONREPETITIVE, EXPONENTIALPULSE WAVEFORM, TJ = 25°C1100Ppk, PEAK POWER (kW)100C, CAPACITANCE (pF)0.1TJ = 25°C1010BREAKDOWN VOLTAGE (VOLTS)0.010.010.11TP, PULSE WIDTH (ms)10Figure 7. Capacitance CurveFigure 8. Typical Pulse Rating Curve120Ippm, PEAK PULSE CURRENT (%)≤ 10 msPEAK VALUEIppm100806040200Ippm, PEAK PULSETA = 25°CPW (ID) IS DEFINED AS THEPOINT WHERE THE PEAK CURRENTDECAYS TO 50% OF Ipp.1201000.9 IPEAKCURRENT (%)806040200.1 IPEAKT = 8 ms00T20 ms0.020.040.06t, TIME (ms)0.080.18/20 ms WAVEFORMAS DEFINED BY ANSI C62.1AND IEC 801−5.HALF VALUE − Ipp/210/1000 ms WAVEFORMAS DEFINED BY R.E.A.td0123t, TIME (ms)450.5 IPEAKFigure 9. Pulse WaveformFigure 10. Pulse Waveformhttp://onsemi.com

4

1SMA5913BT3 Series

PACKAGE DIMENSIONS

SMA

CASE 403D−02

ISSUE C

HEENOTES:

1.DIMENSIONING AND TOLERANCING PER ANSIY14.5M, 1982.

2.CONTROLLING DIMENSION: INCH.

3.403D−01 OBSOLETE, NEW STANDARD IS 403D−02.

DIMAA1bcDEHEL

MIN1.910.051.270.152.294.0.830.76

MILLIMETERS

NOMMAX2.162.410.100.151.451.630.280.412.602.924.324.575.215.591.141.52

MIN

0.0750.0020.0500.0060.0900.1600.1900.030

INCHESNOM0.0850.0040.0570.0110.1030.1700.2050.045

MAX0.0950.0060.00.0160.1150.1800.2200.060

bDPOLARITY INDICATOROPTIONAL AS NEEDED(SEE STYLES)STYLE 1:

PIN 1.CATHODE (POLARITY BAND)

2.ANODE

ALcA1SOLDERING FOOTPRINT*

4.00.1572.00.07872.00.0787SCALE 8:1

mmǓǒinches

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering andMounting Techniques Reference Manual, SOLDERRM/D.

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further noticeto any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liabilityarising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. Alloperating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rightsnor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applicationsintended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. ShouldBuyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or deathassociated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an EqualOpportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:Literature Distribution Center for ON SemiconductorP.O. Box 5163, Denver, Colorado 80217 USAPhone: 303−675−2175 or 800−344−3860 Toll Free USA/CanadaFax: 303−675−2176 or 800−344−3867 Toll Free USA/CanadaEmail: orderlit@onsemi.comN. American Technical Support: 800−282−9855 Toll FreeUSA/CanadaEurope, Middle East and Africa Technical Support:Phone: 421 33 790 2910Japan Customer Focus CenterPhone: 81−3−5773−3850ON Semiconductor Website: www.onsemi.comOrder Literature: http://www.onsemi.com/orderlitFor additional information, please contact your localSales Representativehttp://onsemi.com51SMA5913BT3/D