MAX4635EUB资料

Fast, Low-Voltage, Dual 4CMOS Analog Switches

ΩSPDT

General Description

Features

The MAX4635/MAX4636 are fast, dual 4Ωsingle-pole/double-throw (SPDT) analog switches that operateoGuaranteed On-Resistance

4Ω(max) +5V Supplywith supply voltages from +1.8V to +5.5V. High switch-5.5Ω(max) +3V Supply

ing speeds, 1Ωon-resistance flatness, and low powerconsumption make these devices ideal for audio/video,oGuaranteed Match Between Channels

communications, and battery-operated devices.0.2Ω(max)

Containing two independently controllable SPDToGuaranteed Flatness Over Signal Range

switches in 10-pin µMAX and 10-pin 3mm x 3mm thin1Ω(max) with +5V SupplyQFN packages, the MAX4635/MAX4636 use little boardoFast Switching Speeds

space, and have low power consumption ensuring min-14ns (max) Turn-On Timeimal impact on your power budget. The analog signal6ns (max) Turn-Off Timerange extends to the supply rails. The MAX4635 hasinverted logic compared to the MAX4636.

o1.8V Operation

100Ω(typ) On-Resistance Over Temperature________________________Applications

56ns (typ) Turn-On Time17ns (typ) Turn-Off Time

Battery-Powered Equipmento+1.8V to +5.5V Single-Supply Operation Relay Replacement

oRail-to-Rail®Signal HandlingAudio and Video Signal RoutingoLow Crosstalk: -67dB at 1MHzLow-Voltage Data-Acquisition SystemsoHigh Off-Isolation: -65dB at 1MHzSample-and-Hold CircuitsoTHD: 0.1%

Communications Circuits

Ordering Information

PARTTEMP RANGEPIN-TOPPACKAGEMARKRail-to-Rail is a registered trademark of Nippon Motorola, Ltd.

MAX4635EUB-40°C to +85°C10 µMAX—MAX4635ETB-40°C to +85°C10 ThinAATQFN (3 ✕ 3)MAX4636EUB-40°C to +85°C10 µMAX—MAX4636ETB-40°C to +85°C10 ThinAAOQFN (3 ✕ 3)Pin Configuration/Functional Diagram/Truth Table

TOP VIEWIN1110COM1IN1110COM1IN1110COM1IN1110COM1NO129NC1NC129NO1NO129NC1NC129NO1GND3MAX46358V+GND3MAX46368V+GND3MAX46358V+GND3MAX46368V+NO247NC2NC247NO2NO247NC2NC247NO2IN256COM2IN256COM2IN256COM2IN256COM2µMAXµMAX3 x 3 THIN QFN3 x 3 THIN QFNIN_NO_ TO COM_NC_ TO COM_0OFFON1ONOFFSWITCHES SHOWN FOR \"0\" INPUT________________________________________________________________Maxim Integrated Products1

For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at

1-888-629-42, or visit Maxim’s website at www.maxim-ic.com.

MAX4635/MAX4636元器件交易网www.cecb2b.comFast, Low-Voltage, Dual 4ΩSPDTCMOS Analog SwitchesMAX4635/MAX4636ABSOLUTE MAXIMUM RATINGS

(Voltages Referenced to GND)

V+, IN_ .....................................................................-0.3V to +6VCOM_, NC_, NO_ (Note 1)..........................-0.3V to (V+ + 0.3V)Continuous Current into Any Terminal .............................±30mA Peak Current into COM_, NC_, NO_

(pulsed at 1ms, 10% duty cycle).................................±100mA

Continuous Power Dissipation (TA= +70°C)

10-Pin µMAX (derate 4.7mW/°C above +70°C)............330mW10-Pin Thin QFN (derate 24.4mW/°C above +70°C)..1951mWOperating Temperature Range..........................-40°C to +85°CStorage Temperature Range ...........................-65°C to +150°CLead Temperature (soldering, 10s) ...............................+300°C

Note 1:Signals on NO_, NC_, or COM_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maxi-mum current rating.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functionaloperation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure toabsolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS—Single +5V Supply

(V+ = +4.5V to +5.5V, VIH= +2.4V, VIL = +0.8V, TA= TMINto TMAX, unless otherwise noted. Typical values are at TA= +25°C.) (Notes 2, 9)PARAMETERANALOG SWITCHAnalog Signal RangeVCOM_,VNO_, VNC_RON∆RONRFLAT(ON)INC_(OFF),INO_(OFF)V + = 4.5V , IC 10m A,OM_ = VNO_ or VNC_ = 0 to V+V + = 4.5V , IC 10m A,OM_ = VNO_ or VNC_ = 0 to V+TA = +25°CTA = TMIN to TMAXTA = +25°CTA = TMIN to TMAX0.5-0.1-0.3-0.1-0.3-0.1-0.32.40.8VIN_ = 0 or +5.5V-1005100±0.01±0.01±0.010.102.5V+44.50.20.411.20.1nA0.30.1nA0.30.10.3nAVSYMBOLCONDITIONSMINTYPMAXUNITSOn-ResistanceOn-Resistance MatchBetween Channels (Notes 3, 4)On-Resistance Flatness(Note 5)NO_, NC_ Off-Leakage Current(Note 6)COM_ Off-Leakage Current(Note 6)COM_ On-Leakage Current(Note 6)DIGITAL I/O (IN1, IN2)Input Logic HighInput Logic LowInput Leakage CurrentΩΩΩV+ = 4.5V, ICOM_ = 10mA,TA = +25°CVNO_ or VNC_ = 0 to V+TA = TMIN to TMAXV+ = 5.5V; VCOM_ = 1V,4.5V ; VN 4.5V ,O_ or V NC _ = 1VTA = +25°CTA = TMIN to TMAXTA = +25°CTA = TMIN to TMAXTA = +25°CTA = TMIN to TMAXV+ = 5.5V; VCOM_ = 1V, 4.5V ,ICOM_(OFF)4.5V; VN O_ or V NC _ = 1VICOM_(ON)V + = 5.5V ; V 4.5V,CO M_ = 1V ; V 4.5V ,NO _ or V NC _ = 1V or floatingVIHVILIIH, IILVVnA2_______________________________________________________________________________________

元器件交易网www.cecb2b.comFast, Low-Voltage, Dual 4CMOS Analog Switches

ΩSPDT

ELECTRICAL CHARACTERISTICS—Single +5V Supply (continued)

(V+ = +4.5V to +5.5V, VIH= +2.4V, VIL = +0.8V, TA= TMINto TMAX, unless otherwise noted. Typical values are at TA= +25°C.) (Notes 2, 9)PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITSDYNAMICTurn-On TimeVNO_, VNC_ = 3V;TA = +25°C1214(Note 6)tONRL = 300Ω, CL = 35pF,nsFigure 1aTA = TMIN to TMAX16Turn-Off TimeVNO_, VNC_ = 3V;T56(Note 6)tOFFRA = +25°CL = 300Ω, CL = 35pF,nsFigure 1aTA = TMIN to TMAX8Break-Before-Make TimeVNO_, VNC_ = 3V;TA = +25°C7(Note 6)tBBMRL = 300Ω, CL = 35pF,nsFigure 1bTA = TMIN to TMAX1Charge InjectionQVGEN = 2V, RGEN = 0, CL = 1.0nF, Figure 22pCNO_, NC_ Off-CapacitanceCNO_(OFF),CNC_(OFF)VNO_, VNC_= GND, f = 1MHz, Figure 39pFCOM_ On-CapacitanceCCOM_(ON)VCOM_ = GND, f = 1MHz, Figure 332pFOff-Isolation (Note 7)VCΩ, f = 10MHz, Figure 4-52ISOL = 5pF, RL = 50C -65dBL = 5p F, RL = 50Ω, f = 1M H z, Fi gu r e 4Crosstalk (Note 8)VCL = 5pF, RL = 50Ω, f = 10M Hz , Fig ur e 4-66CTCL = 5pF, RL = 50Ω, f = 1MHz, Figure 4-67dBTotal Harmonic DistortionTHDRL = 600Ω, VNO_ = 5VP-P, f = 20Hz to 20kHz0.1%SUPPLYPositive Supply CurrentI+V+ = 5.5V, VIN_ = 0 or V+0.0011.0µAELECTRICAL CHARACTERISTICS—Single +3V Supply(V+ = +2.7V to +3.6V, VIH= +2.0V, VIL= +0.8V, TA= TMINto TMAX, unless otherwise noted. Typical values are at TA= +25°C.)(Notes 2, 9)PARAMETERSYMBOLCONDITIONSMINTYPMAXUNITSANALOG SWITCHVCOM_,Analog Signal RangeVNO_,0V+V VNC_On-ResistanceR55.5ONV + = 2.7V , IC OM_ = 10m A,TA = +25°CVNO_ or VNC_ = 0 to V+TA = TMIN to TMAX8ΩOn-Resistance Match Between∆R = +25°C0.10.2Channels (Notes 3, 4)ONV + = 2.7V , IC OM_ = 10m A,TAVNO_ or VNC_ = 0 to V+TA = TMIN to TMAX0.4ΩOn-Resistance FlatnessRTFLAT(ON)V + = 2.7V , IC OM_ = 10m A,A = +25°C1.52(Note 5)VNO_ or VNC_ = 0 to V+TA = TMIN to TMAX2.5ΩNO_, NC_ Off-Leakage CurrentINO_(OFF),V + = 3.3V ; V CO M_ = 1V , 3V ;TA = +25°C-0.1±0.010.1(Note 6)INC_(OFF)VNO_ or VNC_ = 3V, 1VTA = TMIN to TMAX-0.30.3nACOM_ Off-Leakage CurrentICOM_(OFF)V + = 3.3V ; V CO M_ = 1V , 3V ;TA = +25°C-0.1±0.010.1(Note 6)VNO_ or VNC_ = 3V, 1VTA = TMIN to TMAX-0.30.3nA_______________________________________________________________________________________3MAX4635/MAX4636元器件交易网www.cecb2b.comFast, Low-Voltage, Dual 4ΩSPDTCMOS Analog SwitchesMAX4635/MAX4636ELECTRICAL CHARACTERISTICS—Single +3V Supply (continued)

(V+ = +2.7V to +3.6V, VIH= +2.0V, VIL= +0.8V, TA= TMINto TMAX, unless otherwise noted. Typical values are at TA= +25°C.) (Notes 2, 9)PARAMETERCOM_ On-Leakage Current(Note 6)DIGITAL I/O (IN1, IN2)Input Logic HighInput Logic LowInput Leakage CurrentDYNAMICTurn-On Time (Note 6)tONVNO_, VNC_ = 2V;CL = 35pF, RL = 300Ω,Figure 1aVNO_, VNC_ = 2V;CL = 35pF, RL = 300Ω,Figure 1aVNO_, VNC_ = 2V;CL = 35pF, RL = 300Ω,Figure 1bQTA = +25°CTA = TMIN to TMAXTA = +25°CTA = TMIN to TMAXTA = +25°CTA = TMIN to TMAX111932-52-65-66-670.0011pCpFpFdBdB7ns61418ns208ns10VIHVILIIH, IILVIN_ = 0 or +5.5V-10052.00.4100VVnASYMBOLICOM_(ON)CONDITIONSV+ = 3.3V; VCOM_ =1V,3V; VNO_ or VNC_ = 1V,3V, or floatingTA = +25°CTA = TMIN to TMAXMIN-0.1-0.3TYP±0.01MAX0.1nA0.3UNITSTurn-Off Time (Note 6)tOFFBreak-Before-Make Time(Note 6)Charge InjectionNO_, NC_ Off-CapacitanceCOM On-CapacitanceOff-Isolation (Note 7)Crosstalk (Note 8)SUPPLYPositive Supply CurrentI+VGEN = 1.5V, RGEN = 0, CL = 1.0nF, Figure 2CNO_(OFF),VNO_, VNC_ = GND, f = 1MHz, Figure 3CNC_(OFF)CCOM (ON)VCOM = GND, f = 1MHz, Figure 3VISOVCTCL = 5pF, RL = 50Ω, f = 10MHz, Figure 4CL = 5pF, RL = 50Ω, f = 1MHz, Figure 4CL = 5pF, RL = 50Ω, f = 10MHz, Figure 4CL = 5pF, RL = 50Ω, f = 1MHz, Figure 4V+ = 3.6V, VIN = 0 or +3.6VµANote 2:The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used inthis data sheet.

Note 3:∆RON= RON(MAX)- RON(MIN).

Note 4:∆RONmatching specifications for QFN-packaged parts are guaranteed by design.

Note 5:Flatness is defined as the difference between the maximum and minimum values of on-resistance as measured over the

specified analog signal ranges.

Note 6:Guaranteed by design.

Note 7:Off-Isolation = 20log10(VCOM/ VNO), VCOM= output, VNO= input to off switch.Note 8:Between any two switches.

Note 9:QFN packaged parts are tested at +25°C and guaranteed by design and correlation over the entire temperature range.

4_______________________________________________________________________________________

元器件交易网www.cecb2b.comFast, Low-Voltage, Dual 4CMOS Analog Switches

ΩSPDT

Typical Operating Characteristics

(TA = +25°C, unless otherwise noted.)

ON-RESISTANCE vs. VCOM ANDON-RESISTANCE vs. VCOM ANDON-RESISTANCE vs. VCOM

TEMPERATURE (V+ = +3V)

TEMPERATURE (V+ = +5V)

1414.0

23.0

3000---66633312

XTA = +85°CXXAAAMMMV+ = 1.8VTA = +85°C10

3.5

2.5

)V+ = 2.5V))Ω8ΩΩ((( NNOO3.0

NOR6V+ = 3.0VRRV+ = 4.5V2.0

42.5

TA = -40°C2TA = +25°CTA = -40°CV+ = 5.0VTA = +25°C02.0

1.5

0

1

2

3

4

5

0

0.5

1.0

1.52.0

2.5

3.0

0

1

2

3

4

5

VCOM (V)

VCOM (V)

VCOM (V)

ON/OFF-LEAKAGE CURRENTTURN-ON/OFF TIMEvs. TEMPERATURE (V+ = +5V)

CHARGE INJECTION vs. VCOM

vs. SUPPLY VOLTAGE

0.12556000--6-663330.10XXXAAA0.05M20MM40

0ICOM(ON) )A15VCC = +5V)ns(-0.05 )nEGC( pFA(F K-0.10Q10

OtAEVCC = +3V/NOL-0.15t20

tON-0.20NO(OFF) 5

-0.25tOFF0-0.30-0.35

-5

0-50

0

50

100

0

1

2

3

4

5

1.5

2.5

3.5

4.5

5.5

TEMPERATURE (°C)

VCOM (V)

SUPPLY VOLTAGE (V)

TURN-ON/OFF TIME

POWER-SUPPLY CURRENTLOGIC-LEVEL THRESHOLDvs. TEMPERATURE (V+ = +5V)

vs. TEMPERATURE (V+ = +5V)

vs. SUPPLY VOLTAGE

2572.0

800--2.5

9066-336663446XX4AAXMMA20M)tVON1.5

(2.0

DLO))HsSn15AnE(( R1.5

FFDONtG1.0

HT /ILN ,EO+Vt10

IEtL1.0

OFF-C0.5

IG5

OL0.5

00

0-50

0

50

100

-50

0

50

100

1

2

3

4

5

TEMPERATURE (°C)

TEMPERATURE (°C)

SUPPLY VOLTAGE (V)

_______________________________________________________________________________________5

MAX4635/MAX4636元器件交易网www.cecb2b.comFast, Low-Voltage, Dual 4ΩSPDTCMOS Analog SwitchesMAX4635/MAX4636Typical Operating Characteristics (continued)

(TA = +25°C, unless otherwise noted.)

TOTAL HARMONIC DISTORTION

vs. FREQUENCY

MAX4636-10MAX4636-11FREQUENCY RESPONSE

100-10-20LOSS (dB)-30-40-50-60-70-80

0.01

0.1

1

10

100

1k

FREQUENCY (MHz)

CROSSTALK0.02010

BANDWIDTH0.08

OFF-ISOLATIONTHD (%)0.060.040.120.10

600Ω IN AND OUTV+ = 5V100

1kFREQUENCY (Hz)

10k

100k

Pin DescriptionPINMAX4635123456710MAX4636193758210NAMEIN1NO1GNDNO2IN2COM2NC2V+NC1COM1Logic Control for Switch 1Normally Open Terminal of Switch 1GroundNormally Open Terminal of Switch 2Logic Control Input for Switch 2Common Terminal of Switch 2Normally Closed Terminal of Switch 2Input Supply Voltage, +1.8V to +5.5VNormally Closed Terminal of Switch 1Common Terminal of Switch 1FUNCTION6_______________________________________________________________________________________

元器件交易网www.cecb2b.comFast, Low-Voltage, Dual 4CMOS Analog Switches

ΩSPDT

MAX4635/MAX4636V+VtIH + 0.5Vr < 5nstf < 5nsV+LOGICINPUT050% VINNC_ or NO_COM_VOUTNO_ or NC_tOFFIN_RLCLVOUTSWITCH0.9 ✕ V0UT0.9 ✕ VOUTLOGICGNDOUTPUT0INPUTtONLOGIC INPUT WAVEFORMS INVERTED FOR SWITCHESCL INCLUDES FIXTURE AND STRAY CAPACITANCE.THAT HAVE THE OPPOSITE LOGIC SENSE.Figure 1a. Switching Time

tr < 5nsMAX4635/MAX4636tV+f < 5nsVIH + 0.5VLOGICV+INPUT50%0 VINNC_ or NO_COM_VOUTNO_ or NC_IN_RLCLLOGICGNDINPUTVOUT0.9 ✕ VOUTtDCL INCLUDES FIXTURE AND STRAY CAPACITANCE.Figure 1b. Break-Before-Make Interval

MAX4635/MAX4636V+∆VOUTV+VOUTR GENNC_COM_OR NO_VOUT INCLOFFVGENONOFFGNDIN OFFONVINOFFINL TO VINHQ = (∆VOUT)(CL)IN DEPENDS ON SWITCH CONFIGURATION;INPUT POLARITY DETERMINED BY SENSE OF SWITCH.Figure 2. Charge Injection

_______________________________________________________________________________________

7

MAX4635/MAX4636元器件交易网www.cecb2b.comFast, Low-Voltage, Dual 4ΩSPDTCMOS Analog SwitchesMAX4635/MAX4636Detailed Description

The MAX4635/MAX4636 are low-on-resistance (RON),low-voltage, dual SPDT analog switches that operatefrom a +1.8V to +5.5V supply. The MAX4635/MAX4636feature very fast switching speed (tON= 14ns max,tOFF= 6ns max) and guaranteed break-before-makeswitching. The low maximum RONallows high continu-ous currents to be switched in a variety of applications.

Logic Inputs

The MAX4635/MAX4636 logic inputs (IN1, IN2) can bedriven up to +5.5V, regardless of the voltage on V+.This allows interfacing to 5V logic signals while operat-ing with a +3.3V supply voltage without external leveltranslation.

Analog Signal Levels

Analog signals ranging over the entire supply voltage(V+ to GND) can be passed with very little change inon-resistance (see Typical Operating Characteristics).The switches are bidirectional, so the NO_, NC_, andCOM_ pins may be used as either inputs or outputs.

Applications Information

10nFV+Power-Supply Sequencing and

Overvoltage Protection

Caution: Do not exceed the absolute maximum rat-ings because stresses beyond the listed ratings cancause permanent damage to the device.Properpower-supply sequencing is recommended for allCMOS devices. Always apply V+ before applying ana-log signals, especially if the analog signal is not currentlimited. If this sequencing is not possible, and if theanalog inputs are not current limited to less than 30mA,add a small-signal diode (D1) as shown in Figure 5. Ifthe analog signal can dip below GND, add D2. Addingprotection diodes reduces the analog range to a diodedrop (about 0.7V) below V+ (for D1), and a diode dropabove ground (for D2).

V+COM_MAX4635MAX4636IN_ VINLORVINHCAPACITANCEMETERf = 1MHzNC_ OR NO_GNDFigure 3. Channel Off/On-Capacitance

+5V10nFNETWORKANALYZERVOUTOFF-ISOLATION = 20log VIN50ΩV ON-LOSS = 20log OUT VINV CROSSTALK = 20log OUT VIN0 OR V+IN_V+COM_VIN50ΩNC_50ΩMAX4635MAX4636NO_GNDVOUTMEASREF50Ω50ΩMEASUREMENTS ARE STANDARDIZED AGAINST SHORTS AT IC TERMINALS. OFF-ISOLATION IS MEASURED BETWEEN COM_ AND \"OFF\" NO_ OR NC_ TERMINAL ON EACH SWITCH. ON-LOSS IS MEASURED BETWEEN COM_ AND \"ON\" NO_ OR NC_ TERMINAL ON EACH SWITCH. CROSSTALK IS MEASURED FROM ONE CHANNEL TO ALL OTHER CHANNELS.SIGNAL DIRECTION THROUGH SWITCH IS REVERSED; WORST VALUES ARE RECORDED. Figure 4. On-Loss, Off-Isolation, and Crosstalk8

_______________________________________________________________________________________

元器件交易网www.cecb2b.comFast, Low-Voltage, Dual 4CMOS Analog Switches

ΩSPDT

POSITIVE SUPPLYChip Information

D1TRANSISTOR COUNT: 239V+PROCESS: CMOS

MAX4635MAX4636NO_COM_VgGNDD2Figure 5. Overvoltage Protection Using Two External BlockingDiodesOn-resistance increases slightly at low supply voltages.Maximum supply voltage (V+) must not exceed +6V.Adding protection diode D2 causes the logic thresholdto be shifted relative to GND. Protection diodes D1 andD2 also protect against some overvoltage situations.With Figure 5’s circuit, if the supply voltage is below theabsolute maximum rating, and if a fault voltage up tothe absolute maximum rating is applied to an analogsignal pin, no damage results.

_______________________________________________________________________________________9

MAX4635/MAX4636元器件交易网www.cecb2b.comFast, Low-Voltage, Dual 4ΩSPDTCMOS Analog SwitchesMAX4635/MAX4636Package Information

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)

10LUMAX.EPS 11e104X S10INCHESMAXDIMMIN0.043A-0.006A10.002A20.0300.037D10.1160.1200.1140.118D20.116E10.120E20.1140.118H0.1870.199L0.01570.0275L10.037 REFb0.0070.0106e0.0197 BSCc0.00350.00780.0196 REFSα0∞6∞MILLIMETERSMAXMIN1.10-0.150.050.750.953.052.953.002.3.052.952.3.004.755.050.400.700.940 REF0.1770.2700.500 BSC0.0900.2000.498 REF0∞6∞Hÿ0.50±0.10.6±0.1110.6±0.1TOP VIEWBOTTOM VIEWD2GAGE PLANEA2AbD1A1E2cE1L1αLFRONT VIEWSIDE VIEWPROPRIETARY INFORMATIONTITLE:PACKAGE OUTLINE, 10L uMAX/uSOPAPPROVALDOCUMENT CONTROL NO.REV.21-0061Note:The MAX4636 does not have an exposed pad.

I10______________________________________________________________________________________

元器件交易网www.cecb2b.comFast, Low-Voltage, Dual 4CMOS Analog Switches

ΩSPDT

Package Information (continued)

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)

SPEL.NIHDAD2A2T NPIN 1 IDFQ1N1 ,L0bC0.351& ,8 PIN 1EE2[(N/2)-1] x e,6INDEX REF.AREADETAIL AeA1kCLCLLLeeASEMICONDUCTORDALLASPROPRIETARY INFORMATIONTITLE:PACKAGE OUTLINE, 6, 8 & 10L, TDFN, EXPOSED PAD, 3x3x0.80 mmNUMBER OF LEADS SHOWN ARE FOR REFERENCE ONLYAPPROVALDOCUMENT CONTROL NO.REV.21-0137D12COMMON DIMENSIONSSYMBOLMIN.MAX.A0.700.80D2.903.10E2.903.10A10.000.05L0.200.40k0.25 MIN.A20.20 REF.PACKAGE VARIATIONSPKG. CODEND2E2eJEDEC SPECb[(N/2)-1] x eT633-161.50±0.102.30±0.100.95 BSCMO229 / WEEA0.40±0.051.90 REFT833-181.50±0.102.30±0.100.65 BSCMO229 / WEEC0.30±0.051.95 REFT1033-1101.50±0.102.30±0.100.50 BSCMO229 / WEED-30.25±0.052.00 REFSEMICONDUCTORDALLASPROPRIETARY INFORMATIONTITLE:PACKAGE OUTLINE, 6, 8 & 10L, TDFN, EXPOSED PAD, 3x3x0.80 mmAPPROVALDOCUMENT CONTROL NO.REV.21-0137D22Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses areimplied. Maxim reserves the right to change the circuitry and specifications without notice at any time.

Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________11©2003 Maxim Integrated Products

Printed USA

is a registered trademark of Maxim Integrated Products.

MAX4635/MAX4636